What is your ring or finger size?
A US, UK or EU size, or a circumference or diameter.
We could not read a size in that. Try “62 mm”, “US 10” or “UK U”.
or
Check it before we go on.
Do you have a ring that fits?
A ring in your desired size.
What do you have at hand?
Choose the way that suits you. All of them work.
Order our ring sizer card
€4,95 shipping. You get €10 back as a discount on your ring.
Test fit all the ring sizes we have, in stock, at home.
1Order the card. It is free; you only pay the shipping.
2Press the black rings out of the card.
3Slide a ring over your finger.
4Loose? Take the next size down.
5The ring that sits snugly is your size.
6Congratulations: you found your size, M. Tap to play again.
- Order the card. It is free; you only pay the shipping.
- Press the black rings out of the card.
- Slide a ring over your finger.
- Loose? Take the next size down.
- The ring that sits snugly is your size.
- Congratulations: you found your size, M. Tap to play again.
- Measure in the evening
- Snug, but it must still come off over your knuckle
Measure a ring that fits
Use a ring you wear on the same finger.
1Take a ruler.
2Lay the ring on the ruler, with the inside edge at 0.
3The ruler's edge must run exactly through the middle of the ring.
4Read where the opposite inside edge sits on the ruler.
5This is your inside diameter. Type it in.
6Congratulations: your inside diameter is 19.8 mm. Fill it in below to get your recommended size.
- Take a ruler.
- Lay the ring on the ruler, with the inside edge at 0.
- The ruler's edge must run exactly through the middle of the ring.
- Read where the opposite inside edge sits on the ruler.
- This is your inside diameter. Type it in.
- Congratulations: your inside diameter is 19.8 mm. Fill it in below to get your recommended size.
Measure with a measuring tape
Measure the finger you will wear the ring on.
1Take a soft measuring tape.
2Lay the start at 0 on your finger and wrap the tape once around.
3Snug, not tight: it must still slide over your knuckle.
4Look where the tape crosses its own start.
5Read the number there. Type it in.
6Congratulations: your finger circumference is 62 mm. Fill it in below to get your recommended size.
- Take a soft measuring tape.
- Lay the start at 0 on your finger and wrap the tape once around.
- Snug, not tight: it must still slide over your knuckle.
- Look where the tape crosses its own start.
- Read the number there. Type it in.
- Congratulations: your finger circumference is 62 mm. Fill it in below to get your recommended size.
Measure with a strip of paper
Cut a strip of paper about 1 cm wide and 10 cm long.
1Take a sheet of paper.
2Cut a thin strip from it.
3Wrap the strip once around your finger, snug.
4Mark where the strip crosses its own start.
5Lay the strip flat, its end on 0, and read the mark.
6Congratulations: your finger circumference is 62 mm. Fill it in below to get your recommended size.
- Take a sheet of paper.
- Cut a thin strip from it.
- Wrap the strip once around your finger, snug.
- Mark where the strip crosses its own start.
- Lay the strip flat, its end on 0, and read the mark.
- Congratulations: your finger circumference is 62 mm. Fill it in below to get your recommended size.
Print the ring sizer
If you have a ring that fits
1In the print window, set the scale to 100% (actual size).
2Print the ring size page.
3Check the scale: lay a bank card on the line, or measure it (85.6 mm).
4Take a ring that fits you.
5Lay it on the circles. A gap around the circle means too small.
6The circle that just fills the inside is your size.
7Congratulations: you found your size, M. Tap to play again.
- In the print window, set the scale to 100% (actual size).
- Print the ring size page.
- Check the scale: lay a bank card on the line, or measure it (85.6 mm).
- Take a ring that fits you.
- Lay it on the circles. A gap around the circle means too small.
- The circle that just fills the inside is your size.
- Congratulations: you found your size, M. Tap to play again.
If you have no ring
1In the print window, set the scale to 100% (actual size).
2Print the ring size page.
3Check the scale: lay a bank card on the line, or measure it (85.6 mm).
4Cut out the paper ring sizer.
5Make a small split at the scissors mark.
6Wrap it around your finger and slide the pointed end through the split.
7Pull it snug. The size closest to the split is yours.
8Congratulations: you found your size, M. Tap to play again.
- In the print window, set the scale to 100% (actual size).
- Print the ring size page.
- Check the scale: lay a bank card on the line, or measure it (85.6 mm).
- Cut out the paper ring sizer.
- Make a small split at the scissors mark.
- Wrap it around your finger and slide the pointed end through the split.
- Pull it snug. The size closest to the split is yours.
- Congratulations: you found your size, M. Tap to play again.
- Measure in the evening
- Snug, but it must still come off over your knuckle
Download the sizer (PDF)
No circle fits? Measure your ring or finger another way and order a custom size.
- Always measure the inside of the ring, not the outside.
Same person, or a different size?
Buying for two people? Each ring keeps its own size.
Saved for this shop: every ring page now selects your size.
Inside circumference
Recommended
Your size
Difference
Exactly your size. No difference.
This size cannot be chosen for this ring right now. Please pick it in the size list on the page.
Current ring already loose?
Current ring tight?
or
or
Custom orders cannot be cancelled after 48 hours.
Prefer your exact size? · 8 to 10 weeks
You're special.
This size cannot be chosen for this ring right now. Please pick it in the size list on the page.
Handmade in your exact size · 8 to 10 weeks · no extra cost
Custom orders cannot be cancelled after 48 hours.